Filter
Top Products
VT1422A Command Reference 365Chapter 7
[SENSe]
Parameters
Comments • The <ch_list> parameter must specify the channel used to sense the bridge
voltage, not the channel position on a Bridge Completion SCP.
• Related Commands: SENSE:STRAIN:…, SENSE:FUNC:STRAIN…,
MEAS:VOLT:EXCitation
• *RST Condition: 3.9 V
• Send with VXIplug&play Function: hpe1422_cmd(...)
Usage STRAIN:EXC Meas_excV,(@107)
set measured excitation voltage for
channel 7
STRAIN:EXC Meas_excV,(@10022)
set excitation voltage for VT1529A/B
channel 0022
[SENSe:]STRain:EXCitation?
[SENSe:]STRain:EXCitation? (@<channel>) returns the excitation voltage value
currently set for the sense channel specified by <channel>.
Parameters
Comments
• The <channel> parameter must specify a single channel only.
• Returned Value: Numeric value of excitation voltage. The data type is float32.
• Related Commands: SENS:STRAIN:EXCitation, MEAS:VOLT:EXCitation
• Send with VXIplug&play Function: hpe1422_cmdReal64_Q(...)
Usage STRAIN:EXC? (@107)
query excitation voltage for channel 7
enter statement here
returns the excitation voltage set by
STR:EXC
Parameter
Name
Parameter
Type
Range of
Values
Default
Units
excite_v numeric (float32) 0.01 - 99 volts
ch_list channel list (string) 100 - 15731 none
Parameter
Name
Parameter
Type
Range of
Values
Default
Units
channel channel list (string) 100 - 15731 none