Filter
Top Products
VT1422A Command Reference 285Chapter 7
DIAGnostic
DIAGnostic:OTDetect[:STATe]?
DIAGnostic:OTDetect[:STATe]? (@<channel>) returns the current state of
"Open Transducer Detection" for the SCP containing the specified <channel>.
Parameters
Comments • The <channel> parameter must specify a single channel only.
• Returned Value: Returns 1 (enabled) or 0 (disabled). The data type is int16.
• Related Commands: DIAG:OTDETECT:STATE ON | OFF
• Send with VXIplug&play Function: hpe1422_cmd(...)
Usage DIAG:OTD:STATE? (@108)
enter statement returns either a 1 or a 0
DIAGnostic:QUERy:SCPREAD?
DIAGnostic:QUERy:SCPREAD? <reg_addr> returns data word from a Signal
Conditioning Plug-on register.
Parameters
Comments
• NOTE: This command may not be used while instrument is INITed.
• Returned Value: returns numeric register value. data type is int32.
• Send with VXIplug&play Function: hpe1422_cmdInt32_Q(...)
Usage DIAG:QUERY:SCPREAD? 258
read SCP #4 config/status register
enter statement here
return SCP ID value
Parameter
Name
Parameter
Type
Range of
Values
Default
Units
channel channel list (string) 100 - 163 none
Parameter
Name
Parameter
Type
Range of
Values
Default
Units
reg_addr numeric (int32) 0-65,535 none