A SERVICE OF

logo

Open as PDF
next previous
29
BAG G
Two Speed Assembly:
G-1
Locate the 45-tooth spur gear and the outer aluminum gear hub (with
the one-way bearing installed).
G-2
slide the 45-tooth spur gear onto the outer aluminum gear hub so that
the notches in the hub engage the tabs molded into the gear.
G-3
Secure the gear to the hub with the snap ring.
Use snap ring pliers.
G-4
Locate the inner gear hub and and the 10x19x5mm ball bearing. Also
find a socket or some other round object which matches the diameter of
the outside race of the ball bearing (19mm diameter).
G-5
Use the socket and a mallet to gently tap the bearing into position.
The
socket should be sized to only touch the outside race of the bearing. If
you try to press from the inner race, the bearing will be permanently
damaged.
inner gear hub
ball bearing