Traxxas 4801 Manual

A SERVICE OF

next previous

53

K-14

Fold the excess antenna wire over the top of the antenna tube and

secure it with the vinyl antenna tip.

K-15

Locate the servo saver adapters. The servo saver will fit standard

Traxxas and Futaba standard servos without an adapter. Sanwa and

Airtronics servos may require an adapter.

K-16

Install the servo saver with adapter (if necessary) onto the steering

servo in the 12:00 position (straight up). Secure the servo saver with the

screw included in your radio system.

K-12

Insert the antenna wire through the plastic antenna tube.

K-13

Insert the plastic antenna tube into the antenna mount on the receiver

plate.