A SERVICE OF

logo

Open as PDF
next previous
48
J-12
Secure the flywheel to the crankshaft with the clutch adapter nut. Hold
the flywheel with a pair of “Channel Lock™” pliers while torquing the
adapter nut.
J-13
Install the clutch shoes as shown.
Refer to the diagram to ensure that
the leading and trailing edges of
the clutch shoes are positioned
correctly.
J-15
Locate the clutchbell, a chrome 3x10mm caphead machine screw (with
metal washers attached) and a 5x8x.05 plastic washer. Slide the washer
over the end of the 3x10mm caphead machine screw.
J-16
Place the clutch bell over the clutch shoes and secure it with the chrome
3x10mm caphead machine screw and plastic washer
.
J-14
Close the ends of the clutch spring. Wrap the clutch spring around the
clutch shoes.