3
WARRANTY STATEMENT
Every effort has been made in component design and
material selection to make your model as durable as
possible and still maintain a competitive race weight.
Because this model is intended for use in high speed
competition under the most severe conditions, no war-
ranties are expressed or implied relating to the longevity
of the parts.
If you find a part that has a defect in materials or work-
manship, please return it to us BEFORE IT IS USED,
and we will gladly replace it.
Damage caused by crash damage, excessive force,
abuse, neglect, or failure to adhere to the precautions
outlined in the literature contained with your model will
void the warranty.
HARDW
ARE DESCRIPTION
The drawings that follow are provided to help you identi-
fy the many different sizes and types of hardware you
will be using as you assemble this kit. Note the differ-
ence between the length measurements of the round-
head and countersunk screws. A ruler is provided at the
bottom of each page to measure the length of the screws
in millimeters.
CENTERING THE SERVOS
The kit version does not include the radio system. The
photos in this manual do show the installation of a typical
radio system. Before installing the radio system, find the
center neutral position of the steering and throttle servos.
Connect the radio system according to your manufacturer’s
instructions. Install fresh batteries. Turn on the transmitter
and receiver. Set the throttle and steering trims to their
neutral positions. Now turn off the receiver, followed by
the transmitter. Be careful not to turn any of the servo
output shafts during installation.
12mm
3mm
3x12mm Countersunk
machine screw
12mm
3mm
3x12mm Roundhead
machine screw
Countersunk Cap Screw
Buttonhead Cap Screw
Shoulder Screw
Countersunk Self-tapping Screw
Washerhead Self-tapping Screw
Roundhead Self-tapping Screw
Nylon Locknut
Flange Nut
Grub Screw
Plastic Bushing
Aluminum Spacer
Plastic Washer
Metal Washer
PTFE Washer
Split Washer
E-Clip
Oilite Bushing
