A SERVICE OF

logo

58
M-2
Attach the body posts to the front bumper with the 3x10mm countersunk
machine screws.
L-8
Install the wheel over the hex hub (noting the tread direction) and
secure it with a 4mm flange nut. Repeat steps L-6 through L-8 for the
remaining three tires.
Bag M
Body Mounts
M-1
Locate the front body posts, the rear body posts, (4) nylon clamps, (4)
3x12mm buttonhead machine screws, and (2) 3x10mm countersunk
machine screws.
L-7
Slide the wheel hex onto the stub axle so that the slot in the hex hub
engages the pin in the stub axle.
hex nut
L-6
Insert an axle pin into the hole in the stub axle.