Traxxas 4801 Manual

A SERVICE OF

next previous

55

K-24

Insert the brake cam through the brake cam. Position it as shown and

secure it with a 3mm grub screw in the top of the brake cam.

K-26

Insert the brake wire through the brake cam and then through the rod

guide.

K-23

Insert the end of the throttle rod through the top hole on the carburetor

throttle arm. Attach the servo horn to the servo, as shown, with the

screw included in your radio system.

K-24

Locate the brake cam lever and a 3mm grub screw.

K-25

Slide a 3x6mm flat metal washer over the end of the brake rod followed

by the 20mm piece of fuel tubing. Secure the assembly with a screw col-

lar and 3mm grub screw.