A SERVICE OF

logo

57
L-2
Install the inserts into the tires.
L-3
Stretch the tires over the rims. Note: the tires are directional. Place the
wheels around the car to make sure that the arrows in the tread design
on each tire point to the front of the car.
L-4
Glue the tires to the rims with thin CA glue. Pull back the tire and allow
the glue to run into the tire/rim bead.
L-5
Locate (4) axle pins, (4) aluminum hex hubs (blue anodized), and (4)
4mm flange nuts.
foam insert
Bag L
Wheels and Tires
L-1
Locate (4) molded foam inserts, (4) tires, and (4) wheel rims. Wash the
tires in warm soapy water. Let them dry completely before continuing.