Filter
Top Products
OPERATION
Use the +10 Button when you select two digit camera numbers.
EX) Camera Number 12 = Press the +10 Button, and then press the No. 2 Button.
CAMERA/NUMBER INPUT buttons are used to input the password in the password lock function.
5.2.2.2 Auto Sequence Display
<ADD AUTO SINGLE : ON> example for 16CH
according to the
- OFF” in the AUTO SEQUENCE setup menu, the single
- ay, set up “ADD AUTO SINGLE : ON” in the AUTO SEQUENCE setup
-
.2.2.3 Freeze
MULTI SCREEN MODE
e, press the FREEZE button and then select the desired camera
REEZE button again to release the FREEZE mode.
INGLE SCREEN MODE
ter the desired channel is selected.
- Press the AUTO button, each screen display will be automatically switching
AUTO SEQUENCE setup.
If you set up “ADD AUTO SINGLE :
display will be skipped.
To view the single displ
menu and the single display will be included in the auto sequence display.
Press the AUTO button again to exit the AUTO mode.
akes place, the AUTO SEQUENCE mode will be cancelled.
re information.(Page 40)
If an event t
Please refer to the AUTO SEQUENCE of Chapter 6 MENU setup for mo
5
At the Multi display mod
number.
Press the F
S
Press the FREEZE button af
Press the FREEZE button again to release the FREEZE mode.
- If you press the MULTI button after pressing the FREEZE button, all the channels will display
still images.
- FREEZE function is not available, when auto mode is selected.
formation) (Refer to AUTO SEQUENCE in the SCREEN menu for further in
18