Filter
Top Products
-
MENU SETUP
And you have to insert the same numbers again to verify the password after entering the NEW
he ESC button.
t the PASSWORD menu,
e SUPERVISOR PASSWORD using the © , ª buttons.
SUPERVISOR PASSWORD and the
Insert the current password in the eight digits marked ******** beside OLD PASSWORD using the
t the PASSWORD menu,
U DISPLAY CHECK using the © , ª buttons.
Select “ON” or “OFF” to set up the MENU DISPLAY CHECK using the (-), (+) buttons or wheel
scroll of mouse.
6.5.3.4 POWER OFF CHECK
At the PASSWORD menu,
Move the cursor to the POWER OFF CHECK using the © , ª buttons.
Select “ON” or “OFF” to set up the POWER OFF CHECK using the (-), (+) buttons or wheel scroll
of mouse.
PASSWORD.
To exit this MASTER PASSWORD menu, press t
6.5.3.2 SUPERVISOR PASSWORD
A
Move the cursor to th
Press the ENTER button when the cursor is on the
following screen appears.
CAMERA/ NUMBER INPUT buttons.
And then insert 8 numbers of NEW PASSWORD using the CAMERA/ NUMBER INPUT buttons.
And you have to insert the same numbers again to verify the password after entering the NEW
PASSWORD.
To exit this SUPERVISOR PASSWORD menu, press the ESC button.
NOTE: Supervisor can’t change or setup the MENU
You can use only 0~9 number buttons to setup the PASSWORD.
Master ‘s default password is 11111111 Supervisor ‘s default password is 22222222.
.5.3.3 MENU DISPLAY CHECK 6
A
Move the cursor to the MEN
If MENU DISPLAY CHECK is “ON”, the password (only Master password is applicable) will be required when
you display or set the MENU. The default is “OFF”.
If POWER OFF CHECK is “ON”, the password will be required when the system power is turned off.
The default is “OFF”.
62