Filter
Top Products
MENU SETUP
6.4.8 RELAY OUTPUT
At the EVENT menu,
Move the cursor to the “RELAY OUTPUT” using the © , ª buttons.
following screen appears.
Move the cursor using the © , ª , § , ¨ buttons and set up the value using the (-), (+) buttons or
wheel scroll of mouse.
Press the § button to see the next page.
To exit this screen, press the “ESC” button.
Press the ENTER button when the cursor is on the “RELAY OUTPUT” and the
NOTE
- It is possible to set the RELAY OUTPUT of each channel in the type of event.
USER, NOT USED and HDD ERROR.
Press the “FUNCTION” button again if you want to exit this mode.
- Relay output is from 1 to 4 and it is possible to set the period of the relay output.
<RELAY 4 SELECT>
There are POWER,
POWER: The relay is working when power is off.
USER: User can operate the relay manually.
Press the “FUNCTION” button to operate RELAY 4 manually.
NC NO: And then press the (+) button.
NO→NC: And then press the (-) button.
Please r
efer to 7.3 Relay Out .
56