Filter
Top Products
OPERATION
Press the “PTZ” button to control pan, tilt and zoom functions of PTZ camera.
Use the § , ¨ button to pan left and right and the © or ª button to tilt up and down.
Turn the SHUTTLE ring to zoom in and out.
Use the (-) or (+) button to focus. Or press the (AF) button for auto focusing.
Press the PTZ button again to exit the PTZ mode.
** Please refer to 6.6.4 PTZ setup of LINK menu, page 74.
5.2.12.2 PTZ PRESETTING
Press the “PTZ” button to enter PTZ mode.
Press the “PRESET” button to enter PRESET mode and “PTZ(PRESET)MOVE”, OSD will be
displayed on the left side of the monitor.
Move to the desired preset location using the “NUMBER” buttons.
Press the “PRESET” button again and “PTZ(PRESET)SET”, OSD will be displayed on the left
side of the monitor.
Make the desired setting of the PTZ camera using the © , ª , § , ¨, (-), (+) buttons.
Press the “NUMBER” button to set up the revised presetting.
PRESETS
- A preset is a user-defined camera position using pan and tilt, zoom, and focus commands.
This DVR has the Programming capacity for 16 preset locations for 16CH.
This DVR has the Programming capacity for 8 preset locations for 8CH.
This DVR has the Programming capacity for 4 preset locations for 4CH.
- This DVR has RS-422/485 terminal block telemetry port on the rear panel.
33