Filter
Top Products
D-108 Owner’s Manual (Storing a Locate Point <Edit Point>)
59
2
2, 5
8 TRACK DIGITAL RECORDER
PREVIEW
ENVELOPE
LOCATE REC END
VARI PITCH
RECORD STOP PLAY REWIND F FWD
PUNCH LOCATE
REHEARSAL
TAKE
TIME BASE SEL
RECALLSTOREHOLD/
/NO
EXIT
/YES
EXECUTE
DISP SEL
REDOUNDOERASE
AUTO RTN
COPY MOVE PASTE
CLIPBOARD
AUTO RTN
OUTINAUTO PLAY
AUTO PUNCH
START OUTIN END
TC INLOCKED HD ACCESS
RECORD TRACK
1/9
2/10
3/11
4/12 5/13 6/14
7/15 8/16
PGM SEL
PUNCH
IN / OUT
LOCATE ABS 0
CLIPBOARD PLAY
AUTO
SHIFT
POWER
OPTICAL
3
Edit and re-store data that is already stored
RECALL the desired time data already stored in the LOCATE key, edit that data and re-store it.
1. Press the RECALL key while the D-108 is stopped.
The menu to select the LOCATE number will appear.
2. Turn the JOG dial to select the desired LOCATE
number, then press the LOCATE key.
The data edit mode will appear when the data stored in
the selected LOCATE number appears.
3. Press the HOLD/> key, or turn the SHUTTLE dial to
move the (cursor) column of the time indication to edit
(cursor flashing point), increase or decrease the
number setting with the JOG dial or input the desired
time base.
4. Press the STORE key (the STORE LED lights up).
The LOCATE number selection menu to store data will
appear.
•If the STORE key is press instead of the LOCATE key at
this stage, it becomes possible to directly LOCATE the
time data of the selected LOCATE number. For more
details refer to the next section on “Location Functions.”
5. You can use the JOG dial to input the desired
LOCATE number.
6. Press the LOCATE key.
The edit time data is stored as the time data for the
selected LOCATE number.
44.1kHz
SETUP
8
7
6
5
4
32
1
LOCATE
42
OL
0
30
24
18
12
9
6
3
∞
Flashing
44.1kHz
87654321
42
OL
0
30
24
18
12
9
6
3
∞
Flashing
44.1kHz
87654321
42
OL
0
30
24
18
12
9
6
3
∞
Flashing
2, 6 4
3