Filter
Top Products
D-108 Owner’s Manual (Locate Function)
60
Locate Function
The D-108 swiftly locates (it moves the current location of the recorder section) the desired point when necessary.
Locate include edit points (in ABS time, MTC time, or in bar/beat/clock) that are stored for the Copy, Move, Paste,
Erase, or Auto Punch In/Out operations.
They also include Locate by specifying a voluntary time, and Locate specifying a voluntary Locate Number (01-
99), as well as Locate directly to the recording end point in a Program (REC END). An application of he Locate
function includes auto functions such as Auto Play, Auto Return and Auto Repeat.
• Locate the beginning of the Program (LOCATE ABS 0)
Press the REWIND button while holding down the STOP button.
The D-108 will immediately locate the beginning of the currently-
selected Program.
• Locate the recording end point of the Program (LOCATE
REC END)
Press the F FWD button while holding down the STOP button.
The D-108 will immediately locate the end point of the currently-
selected Program.
• Locate the position stored in one of the memory keys
Press the desired memory key, then press the LOCATE key.
The D-108 will locate the point (edit point) stored in the corresponding
memory key immediately.
• Locate a specified point
Refer to “Editing and storing locate data” in the chapter “Storing a
Locate Point (Edit Point)” for information on how to edit the data and
on pressing the LOCATE key instead of the STORE key. The point
at specified time value (or bar/beat/clock value) will be located
immediately.
• Locate the last-located point
Directly press the LOCATE key.
The time data of Locate number 00 is located. Locate number 00 is
always update with the last data located (excluding LOCATE ABS 0
and LOCATE REC END). Therefore, you will locate the data in
memory number 00 every time you directly press the LOCATE key.
Direct Locate
The Direct Locate function enables you to locate the following points:
• Specify the Locate Number to locate data
1. Press the RECALL key.
The Locate Number selection menu
appears.
2. Turn the JOG dial or press the
RECALL key to select the desired
number.
3. Press the LOCATE key once.
The time stored in the selected Locate
Number appears.
4. Press the LOCATE key again.
The time data of the selected LOCATE number is swiftly located.
The located time data is constantly stored as time data in Locate
Number 00.
The located time data is always stored as time data in Locate Number
00.
ENVELOPE
RECORD STOP PLAY REWIND F FWD
LOCATE ABS 0
LOCATE REC END
CLIPBOARD PLAY
ENVELOPE
RECORD STOP PLAY REWIND F FWD
LOCATE ABS 0
LOCATE REC END
CLIPBOARD PLAY
VARI PITCHLOCATE
REDOUNDOERASE
AUTO RTN
MOVE PASTE
CLIPBOARD
OUTIN
AUTO PUNCH
START OUTIN END
LOCATE
LOCATE
LOCATE
PREVIEW
RECALL
PREVIEW
RECALL
44.1kHz
87654321
42
OL
0
30
24
18
12
9
6
3
∞