Filter
Top Products
2
2-12 Micro PLC Programmer’s Guide – April 1994
GFK-0804B
Replacing a Rung Element with a Dissimilar Element
To replace an element with an element of a different type (for example, to change a
normally-open contact to an Equals function), select the element with the highlight box.
First, delete the element by pressing the Delete key on your keyboard. (If the small edit
cursor is displayed in the highlight box, first press the Enter key to remove it).
This creates an empty space in the rung. If you do not want to add an element at that
location, insert a horizontal line (F8).
If you want to add an element at that location, use the appropriate function key to enter it.
You may need to delete more than one existing element to insert a new element if the
new element is wider than the element it is replacing.