Filter
Top Products
EN-22
A. Connecting the projector to a computer
Preparation:
• Make sure that the power of the projector and that of the computer are turned o.
• When connecting the projector to a desktop computer, disconnect the computer cables that are connected to the monitor.
1. Connect one end of the supplied Computer cable to the
COMPUTER IN terminal of the projector.
2. Connect the other end of the Computer cable to the monitor
port of the computer.
• Additional devices, such as a conversion connector and an
analog Computer output adapter, are required depending on
the type of the computer to be connected.
• When viewing images supplied from an analog-connected
computer, press the COMPUTER button on the remote
control.
• Turn on the power of the projector before that of the computer.
• Use of a long cable may decrease the quality of projected images.
• Also read the instruction manual of the equipment to be connected.
• Images may not be projected correctly, depending on the type of the computer connected.
• Contact your dealer for details of connection.
B. Plugging the power cord
Plug the power cord in the same way as described in “Viewing video images.” (See page 17.)
Viewing computer images
2
1
To monitor port
COMPUTER IN
Computer cable