Filter
Top Products
EN-42
Adjusting projected images (continued)
To adjust the 3D Brightness:
You can adjust the 3D Brightness of the projected image using the menu. This menu is available only in 3D mode.
(See page 37 for menu setting.)
1. Display the Input menu.
2. Press the p or q button to select 3D Brightness.
3. Press the ENTER button.
4. Press the p or q button to select the desired item.
5. Press the ENTER button to select the desired value.
To cancel the menu:
6. Press the MENU button.
To adjust the 3D Sync:
You can adjust the 3D Sync of the projected image using the menu. This menu is available only in 3D mode.
(See page 37 for menu setting.)
1. Display the Input menu.
2. Press the p or q button to select 3D Sync.
3. Press the ENTER button.
4. Press the p or q button to select the desired item.
5. Press the ENTER button to select the item.
To cancel the menu:
6. Press the MENU button.