Filter
Top Products
156 C2630M-B (4/08)
WORKING WITH TIME SYNCHRONIZATION
The DX8100 supports the Simple Network Time Protocol (SNTP), which allows the DX8100 to access Network Time Protocol (NTP) servers to
synchronize DX8100 clocks. The DX8100 allows you to manually or automatically synchronize its time to a NTP time server. Additionally, the
DX8100 server can provide time synchronization for the other DX8100 network. There can be only one NTP time server in the DX8100 network.
This section describes how to synchronize the DX8100 clock and is organized into the following topics:
• Adding a NTP Time Server on page 156
• Editing a NTP Time Server on page 157
• Deleting a NTP Server on page 158
• Comparing the DX8100 and NTP Server Time on page 158
• Manually Synchronizing the DX8100 Time on page 159
• Setting Up Automatic Time Synchronization on page 159
• Enabling Database Overwrite on page 160
Adding a NTP Time Server
To add a NTP time server:
1. On the DX8100 toolbar, click . The Setup dialog opens to the Camera page.
2. In the Setup dialog box, click . The Network page is displayed.
3. Click the NTP tab.
4. Do the following:
a. Click Add/Edit/Delete. The NPT Server List dialog box opens.
Figure 134. NTP Server List Dialog Box
b. Click Add. The Add/ Edit NTP Server dialog box opens.
Figure 135. Add / Edit NTP Server Dialog Box