Filter
Top Products
C2630M-B (4/08) 169
15. Click Schedule . The Schedule setup page is displayed.
16. Create an ATM/POS schedule for the camera you linked to the ATM/POS address.
Figure 150. Schedule Setup Page
For information about verifying that the ATM/POS configuration is set up correctly, refer to Verifying the ATM/POS Communication Connection on
page 179.
Setting Up an ATM/POS Data Format
The DX8100 allows you to create a data format for each ATM/POS device. You can assign a unique name to each data format. The data format
values determine how data from ATM or POS terminals is interpreted. This information is used to separate the data stream into individual
transactions and separate the various fields within the transaction. Every field format must match that of the ATM or POS device, especially the
month format.
Access the Network page to configure the data format. For information on accessing the Network page, refer to Setting Up DX8100 Network
Access on page 151. For information about the Port/Device tab, refer to Setting Up Port and Device Communication Properties on page 161.
This section describes how to create a data format template and includes the following topics:
• Understanding the Data Format Page
• Creating a New Data Format on page 172
• Editing a Data Format on page 172
• Deleting a Data Format on page 173