Filter
Top Products
54 C2630M-B (4/08)
Start Programming a Pattern
To program a pattern:
1. On the DX8100 toolbar, click .
2. Drag a camera from the Site tree onto a view panel.
3. On the DX8100 keypad, click to enter programming mode.
4. Using the PTZ keypad, select a number for the pattern (1-4).
5. Click .
6. Move the camera through a series of movements using the on-screen PTZ and focus controls.
Figure 26. Programming a Pattern
Stop Programming a Pattern
To stop programming a pattern:
1. On the DX8100 keypad, click .
2. Click .
ACTIVATING A PATTERN
When activated, a pattern will repeat indefinitely until it is cleared, another pattern is set, or the on-screen PTZ control is moved.
To activate a pattern:
1. On the DX8100 keypad, click a pattern number (1-4) on the keypad.
2. Click .
Figure 27. Activating a Pattern
ᕤ
ᕥ
ᕣ
ᕡ
ᕢ