Filter
Top Products
168 C2630M-B (4/08)
Figure 148. Assigning the Data Format ATM/POS Devices
12. Click Linking . The Linking setup page is displayed.
13. Click Event-Recording Link Settings. The Event-Recording Link Settings page is displayed.
Figure 149. Event-Recording Link Settings Page
14. In the ATM/POS Record Link Settings area, do the following:
a. In the ATM/POS Address drop-down box, select an ATM/POS01 address to switch the address set for the associated Regcom box.
b. In the Enable Record/Live on Source ATM/POS Event area, click a camera to link the camera to the ATM/POS address.
c. Click Apply.