Filter
Top Products
56 C2630M-B (4/08)
The following figure shows the PTZ OSD Menu control.
Figure 29. PTZ OSD Menu
The following table describes the parts of the PTZ OSD Menu control.
Accessing a Remote Camera Programming Menu
The DX8100 allows you to navigate the remote camera menu system using any of the following:
• PTZ OSD Menu controls. For information on using the PTZ OSD Menu controls, refer to Using the PTZ OSD Menu Control on page 55.
• Keypad controls. For information on using the keypad controls, refer to Accessing a Remote Camera Programming Menu.
• Keyboard keys. For information on using the keyboard keys, refer to Using PC Keyboard Shortcuts to Operate PTZ and Lens Functions on
page 50.
The following procedure instructs you to use the PTZ OSD Menu control to navigate the remote camera programming menu.
To access a programming menu for a remote camera:
1. On the DX8100 toolbar, click .
2. Drag a remote camera from the Site tree onto a view panel.
For certain camera models, you can also select preset number 95 from the keypad to access remote setup mode.
Table Q. Parts of the PTZ OSD Menu Control
Item Part Description
Enter Provides the following actions:
• Accepts the selected remote camera OSD menu choice.
• Accesses menu option parameters. For example, point the cursor at the Language option and click Enter
accesses the list of available languages.
Exit N/A
Up and Down
Buttons
Navigate up and down the remote camera OSD menu, or cycle through a list of options or parameters.
Left and Right
Buttons
Perform no activity.
ᕢᕡ
ᕤ
ᕣ
ᕤ
ᕣ