Filter
Top Products
104
Selecting the still image size
You can select image size 1600 × 1200 or 640 × 480 (When the POWER switch is set to
CAMERA or VCR, the image size is automatically set to 640 × 480.).
The default setting is 1600 × 1200.
The POWER switch should be set to .
Operate by touching the panel.
(1) Press FN to display PAGE1.
(2) Press MENU to display the menu.
(3) Select STILL SET in
, then press EXEC (p. 176).
(4) Select IMAGESIZE, then press EXEC.
(5) Select a desired image size, then press EXEC.
The indicator changes as follow:
1600
640
Memory capacity of still images
Recorded images are compressed in JPEG format before being stored in memory. The
memory capacity of still images varies depending on the selected image quality mode
and image size. Details are shown in the table below.
1600 × 1200 image size
Image quality Memory capacity
FINE About 960 KB
STANDARD About 420 KB
640 × 480 image size
Image quality Memory capacity
FINE About 150 KB
STANDARD About 60 KB
Selecting the quality and size of image data
34
RET.
EXEC
Rr
EXIT
EXIT
1600
MEM SET 1
STILL SET
BURST
QUALITY
IMAGESIZE
1600 × 1200
640 × 480
REMAIN
12
RET.
EXEC
Rr
MEM SET 1
STILL SET
BURST
QUALITY
IMAGESIZE
OFF