Filter
Top Products
46
Recording on the tape
The POWER switch should be set to .
Operate by touching the panel.
(1) During standby, press FN and select PAGE2.
(2) Press SELFTIMER.
The
(self-timer) indicator appears on the screen.
(3) Press EXIT to return to FN.
(4) Press START/STOP.
The self-timer starts counting down from about 10 while beeping. In the last
two seconds of the countdown, the beep gets faster, then recording starts
automatically.
Recording still images on the “Memory Stick” during recording
standby
The POWER switch should be set to .
Operate by touching the panel.
(1) Follow the step 1 to 3 in “Recording on the tape.”
(2) Press PHOTO deeply.
The self-timer starts counting down from about 10 while beeping. In the last
two seconds of the countdown, the beep gets faster, then the recording starts
automatically.
To stop the countdown for recording on the tape
Press START/STOP. To restart the countdown, press START/STOP again.
To cancel the self-timer
With your camcorder during standby, press SELFTIMER and the (self-timer)
indicator disappears from the screen. You cannot cancel the self-timer using the Remote
Commander.
Notes
•The self-timer recording is automatically canceled when self-timer recording is
finished.
•You can record using the self-timer only during recording standby.
When the POWER switch is set to MEMORY
You can also record still images onto the “Memory Stick” with the self-timer (p. 122).
Self-timer recording
START/STOP
START/STOP
PHOTO
PHOTO