Filter
Top Products
169
Using the Network function
– DCR-TRV80 only
You can access the Internet using a Bluetooth device (optional) or a dedicated accessory
that serves as a USB Network Adaptor (optional) etc.
Once the access is made, you can view a Web page, send/receive your e-mail, etc. This
section describes only how to open the network menu.
The POWER switch should be set to .
Operate by touching the panel.
Press NETWORK.
The network menu appears.
For details, refer to the Network Function/Application Operating Instructions supplied
with your camcorder.
Notes
•Make sure that your camcorder is during standby with the POWER switch set to
MEMORY/NETWORK.
•Do not remove the power source while operating the network functions or your
network settings may be erased. Also, close the network function before you turn the
POWER switch.
On trademarks
•The Bluetooth trademarks are owned by their proprietor and used by Sony
Corporation under license.
•All other product names mentioned herein may be the trademarks or registered
trademarks of their respective companies. Furthermore, “TM” and “®” are not
mentioned in each case in this manual.
— Using the Network function —
Accessing the network
VCR
MEMORY/
NETWORK
CAMERA
OFF(CHG)
POWER
LOCK
(Bluetooth) lamp
NETWORK