Filter
Top Products
149
Viewing images with a computer
MEMORY MIX album
Once “ImageMixer” is installed, the MEMORY MIX album is created in “Album” of
“ImageMixer” and sample images are stored in there.
Those sample images can be transferred from the MEMORY MIX album to a “Memory
Stick” so that they can be used in MEMORY MIX (p. 116).
Refer to the on-line help for details on the operation procedure.
Replacing WinASPI
To be able to use the ImageMixer CD writing function, you need to install WinASPI. If a
different writing application was previously installed, its writing function may not
work correctly. If that happens, reinstall the original application and replace WinASPI.
Note that the ImageMixer CD writing function may not work properly.
Making the computer recognize your camcorder
If you are using Windows 2000, log in with permission of administrators.
If you are using Windows XP, log in with permission of computer administrators.
Viewing pictures recorded on the tape
(1) Connect the AC Adaptor, then set the POWER switch to VCR.
(2) Press FN to display PAGE1.
(3) Press MENU to display the menu.
(4) Select USB STREAM in
, then press EXEC (p. 180).
(5) Select ON, then press EXEC.
(6) Connect the
(USB) jack on your camcorder to the USB port on the computer
using the supplied USB cable.
The computer recognizes your camcorder, and the Windows Add Hardware
Wizard starts.
(7) Follow the on-screen messages so that the Add Hardware Wizard recognizes
that the USB drivers have been installed. Be sure to allow the installation to
complete without interrupting it.
For Windows 2000, Windows XP users
When the dialog box to confirm the digital signature appears, select “Yes” if you use
Windows 2000 or select “Continue Anyway” if you use Windows XP.
Connecting your camcorder to a computer using the USB cable
(For Windows users)
USB port
USB cable (supplied)
(USB) jack