Filter
Top Products
171
Using the Network function
Using applications
– DCR-TRV80 only
Using your camcorder as a Remote Camera, you can operate your camcorder remotely
from a computer or a PDA with Bluetooth (optional) etc. You can also transfer a still
image (Image Transport) between your camcorder and a computer or a PDA with
Bluetooth (optional) etc.
Using as a Remote Camera
The POWER switch should be set to .
Operate by touching the panel.
(1) Press FN and select PAGE3.
(2) Press RMT CAM.
Your camcorder is set to connecting standby.
For details, refer to the Network Function/Application Operating Instructions supplied
with your camcorder.
Image Transport
The POWER switch should be set to .
Operate by touching the panel.
(1) Press FN and select PAGE3.
(2) Press IMAGE TRANS.
For details, refer to the Network Function/Application Operating Instructions supplied
with your camcorder.
REMOTE CAMERA STANDBY
SONY DCR-TRV80
08 : 00 : 46 : 3E : 61 : C3
END
RET.
PLAY
IMAGETRANS
SEND RECV LOG