Filter
Top Products
66
To import moving pictures to a computer to view still images, we recommend you
record in Progressive Recording Mode. To use Progressive Recording Mode, follow the
procedure below. Still images produced this way are more stable than those recorded in
normal mode, and thus are more suitable for analyzing high-speed action such as sports
scenes. (Since your camcorder takes in an image every 1/30 of a second in Progressive
Recording Mode, moving pictures recorded in this mode may be subject to too much
jitter. To view moving pictures, we recommend recording in normal mode.)
The POWER switch should be set to .
Operate by touching the panel.
(1) Press FN and select PAGE3.
(2) Press PRGRE REC.
To cancel Progressive Recording Mode
Press PRGRE REC again.
To return to FN
Press EXIT.
Note on Progressive Recording Mode
The normal TV broadcast divides the screen into two finer fields and displays them in
turns every 1/60 of a second. Thus, the actual image displayed in an instant covers only
half of the apparent image area. Displaying the whole image simultaneously on a full
screen is called displaying with all the pixels. In this function the picture is clearer than
one in normal function, but moving objects appear jerky since the picture is read/
output every about 1/30 second.
When recording under fluorescent light
When recording in Progressive Recording Mode under fluorescent light or light bulb, a
rare phenomenon may happen in which the screen lights up brightly (Flicker
phenomenon). This is not a malfunction. If you want to stop this phenomenon, cancel
Progressive Recording Mode.
When you record with Progressive Recording Mode
The angle of view is slightly larger than normal recording.
During Progressive Recording Mode, you cannot use the following functions:
– Digital zoom
– Recording still images on the “Memory Stick” during tape recording or tape recording
standby
– Wide mode
– BOUNCE
– SLOW SHTR
– OLD MOVIE
– SteadyShot
Recording with all the pixels
– Progressive Recording Mode