Filter
Top Products
125
“Memory Stick” Operations
You can duplicate selected scenes (programs) for editing onto the “Memory Stick.”
Making the program
The POWER switch should be set to .
Operate by touching the panel.
(1) Insert the tape for playback, and the “Memory Stick” for recording into your
camcorder.
(2) Press FN to display PAGE1.
(3) Press MENU to display the menu.
(4) Select VIDEO EDIT in
, then press EXEC (p. 182).
(5) Select MEMORY, then press EXEC.
(6) Repeat pressing IMAGESIZE to select a desired size. The image size changes
when you press IMAGESIZE.
(7) Follow the step 6 to 10 on page 84.
To finish making programs
Press END.
The program is stored in memory until the tape is ejected.
Notes
•You cannot dub the titles, display indicators, or the contents of Cassette Memory.
•You cannot operate recording during the Digital program editing on the “Memory
Stick.”
On a blank portion of the tape
You cannot set IN or OUT on a blank portion of the tape.
If there is a blank portion between IN and OUT on the tape
The total time may not appear correctly.
During making a program
If you eject the cassette, the NOT READY indicator appears on the screen. The program
will be erased.
Erasing the program you have set
See “Erasing the program you have set” on page 85.
Erasing all programs
(1) Press FN to display PAGE1.
(2) Press MENU to display the menu.
(3) Select VIDEO EDIT in
, then press EXEC (p. 182).
(4) Select MEMORY, then press EXEC.
(5) Follow the step 2 to 4 on page 85.
Recording edited pictures from tape as a
moving picture – Digital program editing
(on “Memory Stick”)
45
OTHERS
DATA CODE
BEEP
COMMANDER
DISPLAY
V
I
DEO ED
I
T
EXIT
RET.
EXEC
0:32:30:14
TOTAL
SCENE
0:00:00
0
V I DEO ED I T
MARK
I
N
START
IMAGE
SIZE
UNDO
END
RETURN
TAPE
MEMORY
320
15sec