Filter
Top Products
98
The label can consist of up to 10 characters and are stored in Cassette Memory. When
you insert the labeled cassette with the POWER switch set to CAMERA, or the POWER
switch is set to VCR, the label is displayed for about five seconds.
The POWER switch should be set to or .
Operate by touching the panel.
(1) Insert the cassette with Cassette Memory you want to label.
(2) Press FN to display PAGE1.
(3) Press MENU to display the menu.
(4) Select TAPE TITLE in
, then press EXEC (p. 178). The TAPE TITLE screen
appears.
(5) Select a desired character. Repeat pressing a key to select a desired character
on the key.
(6) Press c to move the cursor for the next character. Repeat the same procedure
as step 5 and 6 to complete the label.
(7) Press SET. The label is stored in memory.
To return to FN
Press EXIT.
To erase the label you have made
Select C to erase the label in step 5, then press SET.
To change the label you have made
Insert the cassette to change the label, and operate in the same way to make a new label.
If you have superimposed titles in the cassette
When the label appears, up to four titles also appear.
To erase the character
Press C. The last character is erased.
To enter a space
Press c.
Labeling a cassette on a cassette with
Cassette Memory
456
&?
!
ABC DEF
T t
678
90
123
45
MNO
J
KLGH
I
SET
’ . ,
/
–
WXY
Z
TUVPQR
S
[
G
_________
]
EXIT
TAPE TITLE
&?
!
ABC DEF
T t
678
90
123
45
MNO
J
KLGH
I
SET
’ . ,
/
–
WXY
Z
TUVPQR
S
[
GRADU
_____
]
EXIT
TAPE TITLE
&?
!
ABC DEF
T t
678
90
123
45
MNO
J
KLGH
I
SET
’ . ,
/
–
WXY
Z
TUVPQR
S
[
__________
]
EXIT
TAPE TITLE