Filter
Top Products
27
Recording – Basics
Indicators displayed during recording
Indicators are not recorded on the tape.
Remaining battery time indicator during recording
The remaining battery time indicator roughly indicates the continuous recording time.
The indicator may not be correct, depending on the conditions in which you are
recording. When you close the LCD panel and open it again, it takes about one minute
for the correct remaining battery time in minutes to be displayed.
Time code
The time code indicates the recording or playback time, “0:00:00” (hours : minutes :
seconds) in CAMERA and “0:00:00:00” (hours : minutes : seconds : frames) in VCR.
You cannot rewrite only the time code.
Recording data
The recording data (date/time or various settings when recorded) are not displayed
during recording. However, they are recorded automatically on the tape. To display the
recording data, press DATA CODE during playback. You can also use the Remote
Commander for this operation (p. 38).
0:00:01
60min
50
min
REC
JUL 4 2003
12:05:56PM
FN
Recording mode
Cassette Memory
This appears when using the cassette with Cassette Memory.
Time
The time appears about five seconds after the
power is turned on.
Date
The date appears about five seconds after the
power is turned on.
STBY/REC
Remaining battery time
Time code/Tape counter
Remaining tape
This appears after you insert the cassette.
FN button
Press this button to display operation buttons on the
LCD screen.
Recording a picture