Filter
Top Products
173
Customizing Your Camcorder
Changing the menu settings
Icon/item
MANUAL SET
PROGRAM AE
P EFFECT
RED EYE R
FLASH LVL
WHT BAL
SHARPNESS
AUTO SHTR
Mode
——
——
z OFF
ON
HIGH
z NORMAL
LOW
——
——
z ON
OFF
Meaning
To suit your specific shooting requirement (p. 57)
To add special effects like those in movies or on
the TV to images (p. 53, 69)
Red-eye reduction does not function.
Preliminary flash before recording prevents red-
eye.
To make the flash level higher than normal
To use the normal setting
To make the flash level lower than normal
To adjust the white balance (p. 47)
To adjust the sharpness of the image outline with
R/r.
To automatically activate the electronic shutter*
when shooting in bright conditions
To not automatically activate the electronic
shutter* even when shooting in bright conditions
POWER
switch
* The electronic shutter is the function used to adjust the shutter speed automatically.
Note on RED EYE R and FLASH LVL
You cannot adjust RED EYE R and FLASH LVL if the external flash (optional) is not
compatible.
(continued on the following page)
Selecting the mode setting of each item z is the default setting.
Menu items differ depending on the position of the POWER switch.
The screen shows only the items you can operate at the moment.
Menu items are displayed as the following icons:
MANUAL SET
CAMERA SET
VCR SET
LCD/VF SET
MEM SET 1
MEM SET 2
CM SET
TAPE SET
SETUP MENU
OTHERS
To soften To sharpen