Filter
Top Products
118
Superimposing a still image in “Memory Stick” on an image
– MEMORY MIX
To change the still image to be superimposed
Press –/+ in the lower right corner before step 5.
To cancel MEMORY MIX
Press OFF to return to PAGE2.
Note
During recording you cannot reselect the mode. Press OFF to return to PAGE2.
When you select M. OVERLAP
You cannot change the still image or the mode.
During recording
You cannot change the mode.
Recording a superimposed image to the “Memory Stick” as a still
image
Before operation
Insert the “Memory Stick” recorded with still images into your camcorder.
The POWER switch should be set to .
Operate by touching the panel.
(1) Follow the step 1 to 6 on page 117.
(2) Press PHOTO deeply to start recording.
Recording is complete when the bar scroll indicator disappears. The image
displayed on the screen when you pressed PHOTO deeply will be recorded on
the “Memory Stick.”
To cancel MEMORY MIX
Press OFF to return to PAGE2.
Image size of still images
Image size is automatically set to 640 × 480.
To record still images as-is to the tape
Press –/+ in the lower left corner of the screen in M. LUMI mode and keep going until
the bar display on the right is full.
24
MEM
M
I
X
101–0001
+
–
MEM MIX
MCCAM
LUMI
OVER–
LAP
OFF OK
MCCAM
CHROM
CAMCM
CHROM
M. LUMI
101–0001
+–
MEM MIX
OFF OK
+–
101 101
Still image