Filter
Top Products
43
Timer Recording
Recording/Timer Recording
If the timer settings overlap
Overlapped timer settings are shown as follows.
To store the setting, press </, to select “OK,” then press
ENTER.
To cancel or change the setting, select “Cancel.” When the
Timer List menu appears, change or cancel the setting (page 43).
◆When the timer settings overlap
The programme that starts first has priority and the second
programme starts recording only after the first programme has
finished.
◆When the recordings start at the same time
The programme that is set last has priority. In this example, timer
setting B is set after A, so the first part of timer setting A will not
be recorded.
◆When the end time of one recording and the start time of
another are the same
After finishing the previous recording, the other recording may
be delayed.
Note
When “PDC/VPS” is set to “On” for one or more timer recordings, the
start times may change in the event of a broadcast delay or early start.
Checking/changing/cancelling timer
settings (Timer List)
You can check, change, or cancel timer settings using the Timer
List menu.
a Press SYSTEM MENU.
The System Menu appears.
b Press M/m to select “TIMER LIST,” then
press ENTER.
The Timer List menu appears.
1 Disc name
To enter a disc name, see “Labelling a disc (Disc
Name)” (page 73).
2 Timer information:
Displays the recording date, time, recording
mode, etc.
• ❐ indicates the overlapped setting.
•
a
(red) indicates the setting currently being
recorded.
•
z
(grey) indicates that the setting cannot be recorded
in the selected recording mode.
c Press M/m to select the setting you want to
check/change/cancel, then press ENTER.
The sub-menu appears.
d Press M/m to select one of the following items.
•Modify
•Erase
• Check Overlap
◆ To modify the setting
A Select “Modify,” then press ENTER.
The display for modifying appears.
B Press </M/m/, to select the item and
change the setting.
To undo the change, press </M/m/, to select
“Cancel,” then press ENTER or RETURN.
To change another setting, repeat step 2.
C Press </M/m/, to select “OK,” then press
ENTER.
Wed 29.10 21:00-22:00 AAB SP
Wed 29.10 20:30-21:00 DEF SP
Timer
These timer settings overlap. Do you want to save this setting?
OK
Cancel
7:00 8:00 9:00 10:00
Timer setting A
Timer setting B
will be cut off
7:00 8:00 9:00 10:00
Timer setting A
Timer setting B
7:00 8:00 9:00 10:00
Timer setting A
Timer setting B
Mon-Sat 22:00-22:15 SP
Wed 29.10 20:30-21:30 SP
Wed 29.10 21:00-22:00 SLP
Thu 30.10 16:00-17:00 SLP
Sports
-RW VR
TIMER LIST
PDC
VPS
PDC
VPS
AAB
DEF
GHI
DEF
Modify
Modify the timer setting.
Date
Mon-Sat 22
Start Prog. Mode
OK
00
:22
Stop
15
: SP OffAAB
Cancel
VPS
PDC
,continued