Filter
Top Products
45
Timer Recording
Recording/Timer Recording
If the Timer programming (Standard) menu appears,
press < to switch the display.
f Press the number buttons to enter the
PlusCode number, then press SET.
◆ If you make a mistake
Press CLEAR and re-enter the correct number.
◆ To cancel the setting
Press M/m to select “Cancel,” then press ENTER.
g Press M/m to select “OK,” then press
ENTER.
The date, start and stop times, programme position or
station name, recording mode, and PDC/VPS setting
appears. For details about the PDC/VPS function, see
page 42.
◆ If you want to change the setting
A Press </, to select the item you want to
change.
B Press M/m to change the setting.
To cancel the setting, select “Cancel.”
To re-enter the PlusCode number, select “Change.”
h Press </M/m/, to select “OK,” then press
ENTER.
The TIMER REC indicator lights up on the front
panel, and the recorder is ready to start recording.
i Press RETURN to turn off the display.
To record from a decoder or other source, leave the
connected equipment turned on.
To stop recording during timer recording
Press x REC STOP.
If the timer settings overlap
See page 43.
To confirm, change, or cancel timer recording
See “Checking/changing/cancelling timer settings (Timer List)”
(page 43).
z Hints
• The Rec Mode Adjust function also works with this timer setting
method (page 42).
• You can extend the recording duration time during recording
(page 42).
• You can also display the timer programming menu by:
– selecting “TIMER” from the System Menu.
– selecting “Timer” from the Tool menu while the Timer List menu is
displayed.
Notes
• Check the clock set before setting the timer recording. If not, the timer
recording cannot be made.
• You can also use the recorder even when the recorder stands by for
recording. To remind you of the timer setting, a message appears on
your TV screen five minutes before the timer recording starts.
Timer - VIDEO Plus+
Set the timer by entering the timer code.
Standard
PlusCode No.
Cancel
Timer - VIDEO Plus+
Is the follwing timer setting correct? To modify,
adjust each item or re-enter the timer code.
Date
Mon 28.6 10
Start Prog. Mode
OK
00
:11
Stop
30
:HQOffAAB
Cancel
Change
VPS
PDC