Filter
Top Products
82
Video Settings
Pause Mode (DVDs only)
Selects the picture in pause mode.
Component Out
Selects whether or not to output video signals from the
COMPONENT VIDEO OUT jacks.
Notes
• When you set “Line1 Output” to “RGB,” you cannot set “Component
Out” to “On.”
• When you connect the recorder to a monitor or projector via only the
COMPONENT VIDEO OUT jacks, do not select “Off.” If you select
“Off” in this case, the picture may not appear.
Scart Setting
Sets the method of inputting/outputting signals from the SCART
(EURO AV) jacks on the rear panel of the recorder. Select an
option for each of the items below according to the combination
of jacks and methods that you are going to use.
◆Line1 Output
Selects a method of outputting video signals for the LINE 1-TV
jack.
Notes
• If your TV does not accept S video or RGB signals, no picture appears
on the TV screen even if you select “S Video” or “RGB.” See the
instructions supplied with your TV.
• You cannot select ”RGB” when “Component Out” above is set to
“On.”
• SMARTLINK is available only when “Video” is selected.
◆Line3 Input
Selects a method of inputting video signals for the LINE 3/
DECODER jack.
◆Line3 Output
Selects a method of outputting video signals for the LINE 3/
DECODER jack.
Line4 Input
Selects the method of inputting video signals for the LINE 4 IN
jack on the rear panel of the recorder.
Auto
The picture, including subjects that
move dynamically, is output with no
jitter. Normally select this position.
Frame The picture, including subjects that do
not move dynamically, is output in
high resolution.
On Outputs the component video signals.
Off
Outputs no signals.
Video
Outputs video signals.
S Video Outputs S video signals.
RGB Outputs RGB signals.
Video/RGB
Inputs video signals or RGB signals.
S Video Inputs S video signals.
Decoder Select this when connecting to a PAY-
TV/Canal Plus decoder.
Video Outputs video signals.
S Video Outputs S video signals.
Video
Inputs video signals.
S Video Inputs S video signals.