Filter
Top Products
87
Easy Setup (Resetting the Recorder)
Settings and Adjustments
Command Mode
Changes the Command Mode of the recorder if other DVD
equipment is assigned the same Command Mode. Be sure to
match the Command Mode switch on the remote to the setting
made here. For details, see “Inserting the Batteries” on page 22.
Factory Setup
Allows you to select the setup settings by group, and return them
to their default settings. Note that all of your previous settings
will be lost.
1 Follow steps 1 to 3 of “Using the Setup Displays”
(page 77) to select “Options” in the Setup Display.
2 Press M/m to select “Factory Setup,” then press
, or ENTER.
The display for selecting the group of settings
appears.
3 Press M/m to select the group of settings you want
to return to default from “Settings,” “Video,”
“Audio,” “Features,” “Options” “Parental
Control,” and “All,” then press , or ENTER.
The dialogue box appears.
4 Press </, to select “Start,” then press ENTER.
The selected settings return to the default settings.
5 Press ENTER when “Finish” appears.
Easy Setup
(Resetting the Recorder)
Select this to restart Easy Setup mode for basic setup.
Select “Easy Setup” in the Setup Display. To use the display, see
“Using the Setup Displays” (page 77).
Easy Setup
1 Follow steps 1 to 3 of “Using the Setup Displays”
(page 77) to select “Easy Setup” in the Setup
Display.
2 Press ENTER.
3 Press </, to select “Start,” then press ENTER.
4 Follow the Easy Setup explanation from step 5 on
page 22.
DVD1 Select this if the default Command Mode
conflicts with other DVD equipment.
DVD2 Select this if the default Command Mode
conflicts with other DVD equipment.
DVD3
The default Command Mode of the recorder.
Settings
Video
Audio
Features
Options
Easy Setup
Easy Setup
SETUP