Filter
Top Products
138
Error Messages and Warning Messages
Appendix
For more information about error log menu settings, refer
to the Maintenance Manual.
Clearing warning messages
1
Press the ALT/[F8] (CANCEL EDIT) buttons.
2
Select the message to be cleared using the R and r
buttons.
3
Press the [F2] (MARK) button.
An asterisk “*” will appear in front of the message.
The message will not be displayed or saved.
To cancel clearing
Select the warning message you want to cancel clearing,
and press the [F2] (MARK) button.
Adjusting the clock
Press the ALT/[F9] (REAL TIME) buttons in the error log
menu and use the setting below.
To get current time codes
Hold down the SFT button and press the [F5] (GET TC)
button.
To set the data and time
Hold down the SFT button and press the [F6] (SET) button.
Use the T and t buttons to move the bar to the location
to be adjusted.
Use the numeric buttons to change the value.
To adjust minutes and second to zero
Hold down the SFT button and press [F8] (ZERO) button.
To select daylight saving time and normal time
Hold down the SFT button and press [F9] (SEASON)
button.
STANDARD: normal time
SUMMER: daylight saving time (one hour ahead of
normal time)
Changing between normal and daylight saving times
changes the current time by one hour.
Even if the change crosses midnight, the current date is not
changed.
Button Display Function Setting
[F1] PAGE TOP Move to the top page
[F2] PAGE END Move to the page containing the last message
[F3] FULL MSG Display in full the message selected with the cursor
[F4] ALL CLEAR Clear messages (LOG DATA)
[F5] WARNING Display warning messages on, off
[F6] ERROR Display error messages on, off
[F7] CONDITION Display condition messages on, off
[F9] TIME Toggle between time code and real time display TC, REAL
[F10] EXIT Return to display of maintenance information
ALT/[F8] CANCEL EDIT Display the CANCEL EDIT screen
ALT/[F9] REAL TIME Display the REAL TIME screen
Note