Sony SRW-5500 VCR User Manual


 
160
Menu List
Appendix
743 BLACK LEVEL
(ALL)
(HD/UC/SD/DC)
preset: 100%
(4000H)
–31.0% (0H)
[0$110H%]
31.0% (220H)
Adjusts the black level of HD, UC, SD, and DC output.
Note
The range of control possible from the HKDV-900/503 is
–8.0% to 8.0%.
755 MASTER LEVEL
(D1)
preset: 100%
(4000H)
0.0% (0H)
141.3% (5A70H)
Adjusts the level of the high D1 video signal output from SD
SDI OUT and FORMAT CONV. OUT (OPTION) connectors.
Simultaneously adjusts the Y, B–Y, and R–Y level.
756 Y LEVEL (D1)
preset: 100%
(4000H)
0.0% (0H)
141.3% (5A70H)
Adjusts the level of the D1 video signal output from SD SDI
OUT and FORMAT CONV. OUT (OPTION) connectors.
Simultaneously adjusts the Y levels.
757 B–Y LEVEL (D1)
preset: 100%
(4000H)
0.0% (0H)
141.3% (5A70H)
Adjusts the level of the D1 video signal output from SD SDI
OUT and FORMAT CONV. OUT (OPTION) connectors.
Adjusts the B–Y level of the video signal.
758 R–Y LEVEL (D1)
preset: 100%
(4000H)
0.0% (0H)
141.3% (5A70H)
Adjusts the level of the D1 video signal output from SD SDI
OUT and FORMAT CONV. OUT (OPTION) connectors.
Adjusts the R–Y level of the video signal.
762 SETUP LEVEL
(CST)
preset: 7.5 IRE
0.0
[7.5]
10.0
Adjusts the setup level of the analog composite video
signal output from SD OUT COMPOSITE (MONITOR)
connector.
763 SYNC PHASE (SD)
preset: 0
–128
[0]
127
Adjusts the sync phase of the D1 video signal output from
SD SDI OUT and FORMAT CONV. OUT (OPTION)
connectors and analog composite video signal output from
SD OUT COMPOSITE (MONITOR) connector.
764 FINE (SD)
preset: 0
[0]
1024
Makes fine adjustments to the sync phase of the D1 video
signal output from SD SDI OUT and FORMAT CONV. OUT
(OPTION) connectors and analog composite video signal
output from SD OUT COMPOSITE (MONITOR) connector.
775 VIDEO OUTPUT
DATA
8bit
[10bit]
Sets the bit size of the output data from the HD-SD
converter.
8bit: When connected to an 8-bit system
10bit: When connected to a 10-bit system
Notes
Make sure the bit length matches the destination device.
This setting is only active when the HD-SD converter
output is set to D1.
Item number Item Setting Function
[100 4000H ]
%
)
(
[100 4000H ]
%
)
(
[100 4000H ]
%
)
(
[100 4000H ]
%
)
(