Filter
Top Products
56
4-3 TC Menu
Chapter 4 Menu Settings
4-3 TC Menu
The TC menu allows you to set time code-related items
through a single menu. The HOME, TC, VIDEO, AUDIO,
PF1 and PF2 menus show information that includes the
VTR operation mode, time code of the current position,
and the time code type, etc.
To activate the TC menu
Press the TC button.
To change the TC menu page
Press the ALT button.
For details on operation modes, see “4-2 HOME Menu”
on page 50.
TIMER
SEL
UBIT
LTC
TCR
INTRP DF F2
PLAY LOCK
TIMER
RESET
TIMER
SET
TIMER
HOLD
TCR
SEL
LTC
TCG
MODE
ragan
RUN
MODE
free
DF/NDF
DF
TC2
SEL
OFF
REGENE
SOURCE
int-L
STILL
TC
SET 00 00 00 07
00
H
00
M
00
S
00
F
AIN --:--:--:-- AOUT --:--:--:--
IN --:--:--:-- OUT --:--:--:--
F2
SS
HDCAM-SR
REMAIN:01H06M
INTRP (interpolation): This appears when time code cannot
be read correctly and correction has been performed.
VITC: Time code type (LTC/VITC)
F1: Field number (F1/F2)
Data entry window
TCR: Time data type
(CTL/TCR/UBR/TCG/UBG/DUR)
AIN: Time data for an AUDIO IN point
AOUT: Time data for an AUDIO OUT point
IN: Time data for an IN point
OUT: Time data for an OUT point
Button Indication Function Settings
[F1] TIMER SEL Selects time data type. CTL, TC, UBIT
[F2] TIMER RESET Resets the time counter.
[F3] TIMER SET Sets the time data.
[F4] TIMER HOLD Holds the time counter.
[F5] TCR SEL Sets the time code reader. VITC, auto, LTC
[F6] REGENE SOURCE Selects the internal or external time code generator
for TCG regeneration.
int-Lint-V
ext-L
SDI-VSDI-L
[F7] TCG MODE Sets the time code generator. regene, prst, auto
[F8] RUN MODE Selects the running mode of the time code. free, rec
[F9] DF/NDF Selects drop frame mode. DF, NDF, auto
[F10] TC2 SEL Selects the content of the second line of the time
code display.
OFF, LTC, auto, VITC, CTL, UBR
UBV, TCG, UBG
ALT/[F1] TAPE TIMER Selects the CTL display mode. + –12H, 24H
ALT/[F2] PDPSET MENU Pulldown time code preset
ALT/[F3] TC CONV MENU Frame conversion time code preset
ALT/[F4] PDTC DISP Pulldown time code display on, off
ALT/[F5] FC CHARA Superimposition of text data on FC output on, off
ALT/[F6] CHARA SUPER Specifies superimposition of character information to
the HD SDI output and HD-SD converter output.
on, off
ALT/[F7] CHARA H-POS Changes the superimposition position (horizontal). 0 to 15
ALT/[F8] CHARA V-POS Changes the superimposition position (vertical). 0 to 15