Filter
Top Products
39
4-1 Registering and Storing Menu Settings
Chapter 4 Menu Settings
To unregister the selected item
Press the [F6] (BLANK) button.
When a function button with other than the default
assignment is selected, the [F4] (KEY DEF.) button is
valid.
To return the selected function button to its default
setting, press the [F4] (KEY DEF.) button.
5
Press the cursor t button to move the cursor (B) to
the menu list (PF ASSIGN menu), then press the
cursor R or r button to move the cursor to the menu
item to be registered.
To scroll the menu faster
Press the cursor R or r button while holding down the
SFT button.
6
Press the [F7] (PASTE) button to register the item.
The new item is registered to the function button.
7
Repeat steps 3 to 6 to register more items.
To cancel the registration of all new items
Press the [F9] (CANCEL) button.
8
Press the [F10] (SAVE/EXIT) button to save the newly
registered items.
The registration is completed and the SET UP menu
appears in the display again.
4-1-4 VTR Memory Bank Function
Eight VTR memory banks are provided for storing up to
eight sets of menu settings.
The contents of all eight VTR memory banks can be stored
on a memory stick.
For details on memory stick use, see see “4-1-5 Memory
Stick Operations” on page 41.
For details on adding titles to the contents of the VTR
memory bank, see “4-1-6 Adding Titles to the Data” on
page 46.
The contents of SETUP BANK
F cannot be changed.
Storing the current VTR menu settings to a
VTR memory bank
PAGE
PAGE
DEF.
KEY
DEF.
PASTE CANCEL SAVE/
EXIT
BLANK
ALT+HOME
F1 : 001
F2 :
F3 : K17
F4 :
F5 :
F6 : 302
F7 : K18
F8 : K25
F9 : K44
-
F1
PAE
READ
off
VTR SETUP MENU
001:PRE READ
002:REC INH
003:REC INH ARE
005:SERVO REF
006:EXT REF SEL
007:SYNC PLAY
008:LOCAL ENA
009:LOCAL NAP
017:PB/EE STATE
Current setting
Function button
where item is to
be registered
PAGE
PAGE
DEF.
KEY
DEF.
PASTE CANCEL SAVE/
EXIT
BLANK
ALT+HOME
F1 : 001
F2 :
F3 : K17
F4 :
F5 :
F6 : 302
F7 : K18
F8 : K25
F9 : K44
F7
DMC
VTR SETUP MENU -
632:JUMP TC sel
705:YAOO
706:MASTER(HD)
708:Y LEVEL(HD)
710:PB LVL(HD)
711:PR LVL(HD)
712:SETUP(HD)
713:SYNC(HD)
714:FINE(HD)
-
Item to be
registered
Note
Current menu settings in the
VTR (CURRENT SETUP).
These settings are stored
outside the VTR memory
banks even when the power
is off.
Storing/recalling
Storing/recalling
VTR memory banks (SETUP
BANK1 to 8 and F). SETUP
BANK F contains the factory-
set menu settings. By calling up
SETUP BANK F, you can
restore all menu items to their
factory settings.
Memory stick (SETUP BANK
0 to 8). The stick stores
setting data in same way as
the VTR memory banks.
These contents can be later
called up in the VTR.
Storing/recalling
4 6
1
32
5
CLR button