Sony SRW-5500 VCR User Manual


 
94
4-6 AUDIO Menu
Chapter 4 Menu Settings
3
Select the digital audio output signal for each channel.
TR1 to TR2: Output the audio signals recorded on
tracks 1 to 12.
4
Press the [F10] (EXIT) button.
This returns to the AUDIO menu.
Making output settings for individual channels
with the F buttons
By pressing any of the [F1] (SDOUT CH1 TR1) to [F8]
(SDOUT CH8 TR8) buttons, you can select the source
track for each channel.
Making input signal selections for individual
channels with the numeric buttons
1
Press the cursor T or t button, to align the cursor
with the channel for which you want to make the
selection.
2
Press the cursor R or r button, to select the source
channel to be output.
To return to the default settings
Press the cursor center button. The cursor item returns to
the default.
You can also make this setting using the VTR SETUP
menu item 836 “SD AUDIO OUTPUT EXCHANGE”.
4-6-5 Audio Transition Type
Selection for Digital Audio Editing
(AUDIO EDIT)
To select the digital audio transition type at edit points, use
the following procedure.
1
In the AUDIO menu, press the ALT button.
The AUDIO EDIT menu opens, and an edit image
window appears.
2
Press the ALT/[F1] (AUDIO EDIT) buttons to select
the transition type.
Each press of the buttons selects a transition type in the
order CUT t CROSS
t FADE IN/OUT. At the
same time, the display in the edit image window
changes to reflect the selected type.
You can also make this setting using the VTR SETUP
menu item 317 “AUDIO EDIT MODE”.
4-6-6 Fade Processing Time
Selection for Digital Audio Editing
(FADE TIME)
To select the fade processing time for digital audio at edit
points, use the following procedure.
The fade processing time cannot be changed when the
audio transition type has been set to CUT with the ALT/
[F1] (AUDIO EDIT) buttons.
1
Press the ALT/[F1] (AUDIO EDIT) buttons, and select
CROSS or FADE IN/OUT.
The FADE TIME menu appears.
2
Press the ALT/[F2] (FADE TIME) button to select the
fade time.
Each press of the button changes the setting in the
range 5 ms to 115 ms. At the same time, the display in
the edit image window changes to reflect the selected
time.
You can also make this setting using the VTR SETUP
menu item 811 “DIGITAL AUDIO FADE TIME”.
AUDIO
EDIT
cross
FADE
TIME
50ms
REPLCE
MODE
ANALOG
REPLCE
PITCH
GROUP
AUDIO EDIT/FADE TIME
AUDIO EDIT : CROSS FADE
FADE TIME : 50ms
PB
INPUT
IN OUT
Note
AUDIO
EDIT
cross
FADE
TIME
50ms
REPLCE
MODE
ANALOG
REPLCE
PITCH
GROUP
AUDIO EDIT/FADE TIME
AUDIO EDIT : CROSS FADE
FADE TIME : 50ms
PB
INPUT
IN OUT