141
Menu List
Appendix
Menu List
This section describes all of the VTR SETUP menu items.
The VTR SETUP menu items are divided into the
following categories by the function.
• Items relating to VTR operations (Nos. 001 to ...)
• Items relating to operation panels (Nos. 101 to ...)
• Items relating to the remote interface (Nos. 201 to ...)
• Items relating to editing (Nos. 301 to ...)
• Items relating to prerolling (Nos. 401 to ...)
• Items relating to recording protection (Nos. 501 to ...)
• Items relating to the time code (Nos. 601 to ...)
• Items relating to the video control (Nos. 706 to ...)
• Items relating to the audio control (Nos. 807 to ...)
• Items relating to digital process (Nos. 902 to ...)
• Items relating to pulldown control (Nos. A01 to ...)
• Other items (Nos. T01 to ...)
For VTR SETUP menu operations, see “4-7-1 VTR
SETUP Menu” on page 98.
In the “Setting” column of the table, the factory default
settings are indicated by an exclosing box.
Items Relating to VTR Operations (Nos. 001 to ...)
Item number Item Setting Function
001 PRE-READ [off]
on
Selects the pre-read (read-before-write) mode for insert
editing.
off: No pre-read operation
on: Pre-read operation
002 REC INHIBIT select [off]
all/crash REC/video
CTL/audio CTL
casst
Selects the record inhibit mode.
off: Recording is enabled. (The REC INHIBIT indicator
does not light.)
all/crash REC/video CTL/audio CTL: Recording is inhibited
on the set channels.
The scope of inhibiting recording is determined by
menu item 003.
casst: When the recording protection plug on the cassette
is pushed in, this setting is displayed. This setting
cannot be selected.
003 REC INHIBIT
AREA select
[all]
crash REC
video/CTL
audio/CTL
casst
Selects the scope to which inhibiting recording applies.
all: All recording is inhibited. (The REC INHIBIT indicator
lights.)
crash REC: The normal recording mode is inhibited. Use
this setting when you wish to record in assemble
editing or insert editing only.
video/CTL: Recording of video and CTL is inhibited.
audio/CTL: Recording of audio and CTL is inhibited.
casst: When the recording protection plug on the cassette
is pushed in, this setting is displayed. This setting
cannot be selected.
The REC INHIBIT indicator lights or flashes to indicate the
state of the recording inhibit mechanism on the cassette.
For details, see item 104.