Filter
Top Products
Teledyne API Model 100AH SO
2
Analyzer Instruction Manual, 02417, Rev. D
1 HOW TO USE THIS MANUAL
The Model 100AH has been designed with serviceability, reliability and ease of operation in
mind. The M100AH's microprocessor continually checks operating parameters such as
temperature, flow, and critical voltages. The instruments modular design uses captive screws to
facilitate repair and ease of access. If you encounter any difficulty refer to Section 10 General
Troubleshooting Hints.
We recognize that the need for information in this manual changes as time passes. When the
instrument first arrives, it is necessary to get it up and running quickly and verify its correct
operation. As time passes, more detailed information is often required on special configurations,
calibration alternatives and other operational details. Finally there is the need for periodic
maintenance and to quickly troubleshoot problems to assure maximum uptime and data integrity.
To address these needs, we have created three indexes to the information inside. They are:
Table of Contents:
Outlines the contents of the manual in the order the information is presented. This is a good
overview of the topics covered in the manual. There is also a list of Tables and a list of Figures.
Index to M100AH Front Panel Menus:
The Menu Index (Figure 5-1, Figure 5-2 and Table 5-2) briefly describes the front panel menus and
refers you to other sections of the manual that have a detailed explanation of each menu selection.
Troubleshooting Section 10:
The Troubleshooting Section, outlined in the Table of contents, allows you to diagnose and repair
the instrument based on variables in the TEST menu, the results of DIAGNOSTIC tests, and
performance faults such as excessive noise or drift. The troubleshooting section also explains the
operation, adjustment, diagnosis and testing of each instrument subsystem.
If you are unpacking the instrument for the first time, please refer to Getting Started in
Section 2.
1-1