Filter
Top Products
Teledyne API Model 100AH SO
2
Analyzer Instruction Manual, 02417, Rev. D
SETUP PROPERTIES FOR CONC:
NAME: CONC
EVENT: ATIMER
STARTING DATE: 25-JUL-96
SAMPLE PERIOD: 000:00:01
REPORT PERIOD: 000:00:05
NUMBER OF RECORDS: 800
RS-232 REPORT: ON
COMPACT REPORT: OFF
CHANNEL ENABLED: ON
CAL. HOLD OFF: ON
PARAMETERS: 1
PARAMETER=CONC1, MODE=AVG, PRECISION=1
In this example, the data channel’s NAME property is “CONC”; the EVENT property is
ATIMER; the PARAMETERS property is 1 (indicating a single parameter); the NUMBER OF
RECORDS property is 800, and the RS-232 REPORT property is ON. The list of parameters and
their properties is also printed. Each data channel stores its data in a separate file in the RAM
disk, and this property shows the file name.
Data Report Format
A data report format looks like the following:
D 31:10:06 0412 CONC : AVG CONC1=6.8 PPM
This report uses the traditional TELEDYNE API format of a leading first character (“D” in this
example), a time stamp (“31:10:06”), and the instrument ID (“0412”). The other fields in the
report are the data channel name (“CONC”), the sampling mode (“AVG”), the parameter
(“CONC1”), the parameter value (“6.8”), and the units (“PPM”).
If the RS-232 interface is in the quiet mode, then these reports are not printed, although they can
be requested by a user or host computer at a later time.
7-15