Filter
Top Products
Teledyne API Model 100AH SO
2
Analyzer Instruction Manual, 02417, Rev. D
6.4 4-20 mA, Isolated Current Loop Output
The standard non-isolated 4-20 mA current output provides current output capability by sharing the
common electrical ground. The optional current output offers to isolate the electrical ground from
the external ground of the interfacing device. The setup and operation is identical to the non-isolated
current output. See Troubleshooting Section 10 for electrical calibration procedure and refer to
drawings 01087 and 01248 for the jumper settings. Depending on the jumper setting, it can be used
for the current output or the voltage output.
NOTE
Each 4-20 mA current output should be connected to one
interfacing device only.
6-6