Filter
Top Products
Teledyne API Model 100AH SO
2
Analyzer Instruction Manual, 02417, Rev. D
Table 10-5: Model 100AH Variables
No. Name Units
Default
Value
Value
Range
Description
0. DAS_HOLD_
OFF
MIN 15.0 0.5-20.0 Hold off duration after
calibration or diagnostic
mode.
1. TPC_ENABLE ON ON-OFF Temp/Pres compensation
enable
2. RCELL_SET
°
C
50 30-70 Reaction cell temperature
set point
3. DYN_ZERO OFF OFF/ON Enable to adjust zero
calibration through remote
contact closure
4. DYN_SPAN OFF OFF/ON Enable to adjust span
calibration through remote
contact closure
5. RS232_MODE Bit
Field
8 0-99999 Value is SUM of following
decimal numbers:
1=enable quiet mode
2=enable computer mode
4=enable security feature
8=enable front panel RS-
232 menus (Teledyne API
protocol)
16=enable alternate
protocol (i.e. Hessen)
32=enables multi-drop
support
6. CLOCK_ADJ Sec. 0
±
60
Real-time clock adjustment
10-19