Filter
Top Products
About media server port connections
Installing and Configuring the Avaya S8500 Media Server February 2007
19
About media server port connections
The following section explains how to connect the Ethernet ports on the back of the media
server.
S8500 port connections
Use standard CAT5 cables with RJ45 connectors on each end to connect to the various ports. If
the S8500 Media Server has only one port network, connect that port network through the dual
NIC. Figure 7: S8500B Media Server connectivity guide
shows typical connectivity for the
S8500B Media Server. Figure 8:
S8500C Media Server connectivity guide on page 20 shows
typical connectivity for the S8500C Media Server.
Figure 7: S8500B Media Server connectivity guide
Figure notes:
1. Eth0—To the customer network if the
control network is shared. Or, to the
control-network Ethernet switch if the
control network is dedicated
(straight-through CAT5 cable)
2. Eth1—To the Services laptop computer
(cross-over CAT5 cable)
3. Eth2—to the customer network if the
control network is dedicated
(straight-through CAT5 cable)
4. Eth3—Not used
2
1
2
h3msbl5d LAO 052506
1
4
2
3
1