Filter
Top Products
Connecting to the media server remotely over the network
Installing and Configuring the Avaya S8500 Media Server February 2007
91
Connecting to the media server remotely over the network
You can use any computer to connect to the media server through a LAN. The security settings
on the LAN must allow remote access.
1. Open a Web browser or a terminal emulation application.
2. In the address field, enter the IP address or the DNS host name that is assigned to the
media server that you want to access.
Connecting to the media server remotely over a modem
Note:
Note: Remote access over a modem is for Avaya services support access only and not
for routine administration. Because the media server uses the same modem line
to report alarms, the server cannot report new alarms while the line is in use.
You can access the media server through an analog modem. The remote connection requires a
minimum data speed of 33.5 kilobits per second.
On the S8500 Media Server, access the media server through the remote maintenance board
(SAMP) that is installed in the media server. For how to access the SAMP, see Using the Avaya
Server Availability Management Processor (SAMP) (03-300322).
1. Launch the dial-up connection program, which varies depending on your operating
system. Generally, you can access the program through the My Computer or the Control
Panel folders. For more information, see the Help system of your computer.
2. To open the New Connection wizard, double-click Make New Connection.
3. Within the wizard, depending on your operating system, you may be asked to:
● Assign a name to the connection.
● Select dial-up to the network for the network connection type.
● Select the modem you will be using for the dial-up connection.
● Enter the appropriate telephone number to access the active server. For the
customer-supplied telephone numbers, see the completed Electronic Preinstallation
Worksheet.
● Under Advanced, select PPP and log on manually. You might have to type a user
name and password, depending on whether or not the media server that you are
dialing into has a non-null CHAP secret key. If you need a user name and a password,
use craft for the user name and ignore the password field.
4. Click the connection name or icon, if created. Wait for connection.